Your country

Tools that support it use your country for local currency, number formats, units and paper size. Your choice is saved only in this browser.

Type a name or a two-letter code. Use the up and down arrow keys to move through the countries, Enter to choose one and Escape to close.

Construction & Home Calculators

Materials, area, home costs.

  • 83 tools
  • No upload
  • 2 free · free previews of the rest

81 of 83 construction tools need a pass: Pro unlocks 62, Premium all 81 · See passes

Go to the 83 tools

Estimating materials for building and renovation

Ordering too little stops work on site; ordering too much wastes money and space. These calculators turn measurements into quantities and costs, show their working, and let you change every assumption, from the wastage allowance to the size of a bag. They give planning estimates: confirm structural choices with your engineer or contractor.

The main tools, compared

  • Concrete Calculator (Slab, Footing, Column, Tube & Steps) Pro tool

    Adds every part of a pour, from slabs and footings to columns, tubes and stairs, and gives cubic metres, cubic feet and cubic yards with your waste allowance, truckloads and premix bags.

  • Concrete Mix Calculator — Cement, Sand & Aggregate (IS 456) Pro tool

    Cement bags, sand, aggregate and the most water allowed for a nominal or site mix, checked against the minimum cement content and water-cement ratio IS 456 sets for your exposure.

  • Brick Calculator — Bricks, Mortar, Cement & Sand Pro tool

    Bricks for a wall of any thickness with doors and windows taken out, and the mortar, cement and sand to lay them, in Indian, UK or US brick sizes.

  • Tile Calculator Pro tool

    Counts the tiles and boxes a floor and its walls need, each worked out on its own, allowing for joint width, waste from the layout and skirting cut from the floor tiles.

  • Paint Calculator Pro tool

    Paint, primer and putty for rooms or walls from the coverage printed on your tin, with the cheapest mix of pack sizes.

  • Water Tank Capacity Calculator Pro tool

    Litres in a rectangular, round or capsule tank, full or at the depth you measured, and a tank size for your household from the Indian Standard’s per-person figures.

  • Land Area Converter — Bigha, Guntha, Cent, Marla, Acre

    Land units from square feet to acres and the State units of land records, using official sizes only where a State publishes them.

How to choose

Most jobs need two answers: how big the work is, and how much material that takes.

Keep your units consistent. Typing a thickness in millimetres into a box set to metres is the most common slip, and a slab that comes out a thousand times too big is the sign.

Worked example: concrete and cement for a small slab

A slab measures 4 m × 3 m and is 125 mm thick, cast in a conventional 1 : 1.5 : 3 site mix by volume.

  1. Volume: 4 × 3 × 0.125 = 1.5 m³. With a 5% waste allowance, order for 1.575 m³.

  2. A mix measured by loose volume needs more dry material than the finished concrete: a dry-volume factor of 1.54 is common, so 1 m³ of concrete takes 1.54 m³ of dry materials.

  3. Cement is 1 part in 1 + 1.5 + 3 = 5.5, so 1.54 ÷ 5.5 × 1,440 kg/m³ ≈ 403 kg of cement per cubic metre.

  4. For 1.575 m³: 403 × 1.575 ≈ 635 kg, or about 12.7 bags of 50 kg, so buy 13. The Concrete Mix Calculator adds the sand and aggregate with the same assumptions, all of which you can change.

Questions and answers

How much extra should I allow for waste?

Every quantity tool in this guide has a wastage field, because the right figure depends on the job: a few percent for concrete on firm, level ground, more for tiles laid diagonally or in small rooms, where more pieces are cut.

Why is a bigha not the same size everywhere?

Traditional land units vary from State to State and sometimes between districts. The Land Area Converter uses a State’s sizes only where an official source states them, and lets you enter your local definition otherwise.

Can these replace an engineer?

For quantities and budgets they are a solid first estimate. Structural choices such as slab thickness, steel and concrete grade need an engineer: IS 456 allows nominal mixes only up to M20, and stronger concrete needs a design mix.

Start with these construction tools

All 83 construction tools

Every tool in this category by name, grouped by what it does.

Show the full list Hide the full list : All 83 construction tools

Concrete & masonry

8 tools

Quantities and tests for concrete and masonry work.

Steel & reinforcement

5 tools

Weights and schedules for steel and reinforcement.

Paint, tiles & flooring

6 tools

Quantities for surfaces, walls and floors.

Earthwork & outdoor

7 tools

Groundwork, landscaping and outdoor builds.

Roofs, stairs & carpentry

9 tools

Roofs, stairs, framing and cutting timber.

Electrical, water & cooling

12 tools

Cooling, power and water for a building.

Plans, property & costs

25 tools

Plans, land, property costs and buying.

Contracts & site records

7 tools

Agreements, change orders, hindrance registers, price escalation and progress curves.

Architecture & design checks

4 tools

Area statements, exits, acoustics, daylight and fee proposals for architects.

Collections with construction tools

All collections

Good to know

Estimate materials and costs for building and renovation: concrete and mortar, bricks and blocks, tiles, paint, steel and more. Results are planning estimates — add a wastage margin and confirm with your engineer or contractor.

  • All 83 tools run in your browser: what you open or paste is not uploaded.
  • 80 of 83 keep working without a connection once loaded.
  • 8 of 83 tools use the network for part of their work; each one says on its page what it sends and where.
  • Results are estimates for planning and learning, not financial, tax, legal or engineering advice. Check the method and assumptions on each tool’s page.

Other categories

All tools A–Z

Quick answers and tool search

Type to search tools or to get a quick answer, for example 18% of 2500. Use the up and down arrow keys to move through the results, Enter to choose, and Escape to close.